What Do I Do Afyee I Get Clean

Summary

A "clean boot" starts Windows with a minimal set up of drivers and startup programs, and so that you can make up one's mind whether a background program is interfering with your game or program.  This is similar to starting Windows in Safe Mode, but provides you more control over which services and programs run at startup to assistance you isolate the cause of a problem.

How to perform a clean kick

These steps might await complicated at get-go glance, just following them in order, step-by-pace, will help you lot get you back on rail.

Employ the following steps to perform a clean kick in Windows x.  Perform a clean boot for Windows 7, Windows 8 and Windows eight.1

1. Sign in to the computer every bit an administrator.  If you don't have an administrator account, you tin can create i. Create a local user or administrator account in Windows 10 .

2. In the search box on the taskbar, blazon msconfig and select System Configuration from the results.

Important If the reckoner is continued to a network, network policy settings might forestall you from post-obit these steps. Only use the System Configuration utility to change the advanced kick options on the reckoner with guidance from a Microsoft support engineer.  Using the System Configuration utility might make the computer unusable.

1. On the Services tab of System Configuration, select Hide all Microsoft services, then select Disable all.
   

2. On the Startup tab of Organization Configuration, select Open Task Manager.
   

3. Under Startup in Task Manager, for each startup item, select the item and then select Disable.

   

4. Close Task Managing director.

5. On the Startup tab of System Configuration, select OK.  When yous restart the reckoner, it's in a clean kick environment.  Follow troubleshooting steps to install, uninstall, or run your application.  Your computer might temporarily lose some functionality while in a clean boot environment.  Reset the computer to start normally after clean boot troubleshooting and resume functionality.

1. Swipe in from the correct edge of the screen, and so select Search. Or, if y'all're using a mouse, betoken to the lower-right corner of the screen, and so select Search.

2. Type msconfig in the search box, so select msconfig.
   

3. On the Services tab of System Configuration, select Hide all Microsoft services, and then select Disable all.

Of import If the computer is connected to a network, network policy settings might foreclose you from following these steps. Only use the Organisation Configuration utility to change the advanced boot options on the computer with guidance from a Microsoft support engineer.  Using the Organization Configuration utility might make the calculator unusable.

1. On the Startup tab of System Configuration, select Open Task Manager.

2. Select Startup in Chore Director, and then for each startup item, select the detail so select Disable.
   

3. Close Job Manager.

4. On the Startup tab of Organisation Configuration, select OK, and then restart the computer.

The calculator restarts in a clean kicking surround.  Follow troubleshooting steps to install, uninstall, or run your awarding.  Your computer might temporarily lose some functionality while in a make clean kicking environment, however that functionality will render.  Terminate troubleshooting and reset the computer to start ordinarily.

1. Sign in to the computer past using an account that has administrator rights.

2. Select Commencement, type msconfig.exe in the First Search box, and then press Enter to outset the System Configuration utility.
   Annotation If y'all're prompted for an administrator password or for confirmation, type the countersign or provide confirmation.
   

3. On the Full general tab, select Selective startup, and then deselect Load startup items. (The Use Original Boot.ini check box is unavailable.)
   Important If the computer is connected to a network, network policy settings might foreclose you lot from following these steps. Only use the Organisation Configuration utility to change the advanced kick options on the computer with guidance from a Microsoft back up engineer.  Using the Arrangement Configuration utility might make the computer unusable.

4. On the Services tab, select Hide all Microsoft services, then select Disable all.
   
   Note This step lets Microsoft services keep to run. These services include Networking, Plug and Play, Event Logging, Mistake Reporting, and other services. If you disable these services, you might permanently delete all restore points. Do non do this if you want to apply the System Restore utility together with existing restore points.

5. Select OK, so select Restart.  The figurer restarts in a make clean boot environment.  Follow troubleshooting steps to install, uninstall, or run your application.  Your computer might temporarily lose some functionality while in a make clean boot environment, however that functionality will return.  Finish troubleshooting and reset the figurer to start normally.

Install, uninstall, or run an awarding

Later you restart the computer, you'll have a clean boot environment. Then, do one of the following, as appropriate for your situation:

Notation If y'all receive the "The Windows Installer service could non be accessed" error during the installation or uninstallation, you'll need more information. How to start the Windows Installer service when system services are non loaded.  Then install or uninstall the program or update over again.

If the installation or uninstallation is successful, you issue is resolved and you can start as you normally practise.  How to reset the computer to showtime as usual

If the installation or uninstallation still fails, that ways this upshot is not acquired by application or service interference. Y'all mght need to contact the program manufacturer for more specific support.

If the program runs correctly, this issue is acquired by application or service interferences.  You lot can find out which application or service is causing the issue.   How to determine what is causing the result by performing a make clean kick

If the programme still doesn't run every bit expected, this consequence is not caused by application or service interference. You might need to contact the program manufacturer for more than specific support.

How to decide what is causing the problem after you do a clean boot

If your problem does non occur while the computer is in a clean boot surroundings, and then you can decide which startup application or service is causing the problem by systematically turning them on or off and restarting the computer.  While turning on a unmarried service or startup item and rebooting each time will somewhen notice the problematic service or application, the near efficient style to practice this is to examination half of them at a time, thus eliminating half of the items every bit the potential cause with each reboot of the computer.  You can then repeat this procedure until you've isolated the trouble.  Here's how:

1. Sign in to the computer past using an business relationship that has administrator rights. If you lot don't take an administrator account, you can create 1.Create a local user or administrator business relationship in Windows 10

2. For Windows ten, in the search box on the taskbar, type msconfig.  (In Windows 8 or 8.1, swipe in from the right edge of the screen, and and then select Search. Or, if you're using a mouse, bespeak to the lower-correct corner of the screen, and and so select Search.  In the search box, blazon msconfig.)

3. Select msconfig or System Configuration from the search results.

4. Select Services, and then select Hide all Microsoft services.

5. Select each of the check boxes in the upper one-half of the Service list.

6. Select OK, and then select Restart.

7. After the computer restarts, determine whether the problem still occurs.

   • If the problem yet occurs, one of the checked items is the problematic service.  Repeat steps 1 through vi, but in Step 5, clear the lower one-half of the boxes in the Service listing that you selected in your concluding test.

   • If the problem doesn't occur, the checked items are non the cause of the trouble. Repeat steps i through 6, just in Footstep 5, turn on the upper half of the boxes that y'all cleared in the Service list in the last examination.

   • Repeat these steps until you've either isolated the problem to a single service, or until you've determined that none of the services are the cause of the trouble.  If you feel the problem when simply one service is selected in the Service list, go to footstep ten. If none of the services cause the problem, go to stride eight.

8. Select Startup, and and then select the upper half of the check boxes in the Startup Item list.

9. Select OK, then select Restart.

   • If the problem still occurs, repeat stride 8, but this time clear the lower one-half of the boxes in the Startup Item list that you lot selected in your last test.

   • If the problem does non occur, repeat step viii, and plough on the upper half of the boxes that you cleared in the Startup Particular list in the last test.

   • If you however experience the trouble subsequently only one Startup Detail is selected in the Startup Particular list, this means that the selected Startup Detail causes the problem, and yous should go to step 10. If no Startup Detail causes this trouble, in that location might exist a problem with a Microsoft service.  Repair the service, reset, or reinstall Windows

10. Afterward you lot decide the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, run Windows with the problem particular disabled.  To do this, run the Arrangement Configuration utility and enable your Services and Startup Items, just articulate the check box for the problem item.

1. Sign in to the estimator by using an business relationship that has administrator rights.

2. Select Start, blazon msconfig.exe in the Showtime Search box, and then press Enter to showtime the System Configuration utility.
   Note If yous're prompted for an administrator password or for confirmation, type the password or provide confirmation.
   

3. Select the Services tab, and so select Hide all Microsoft services.

4. Select the upper half of the check boxes in the Service list.

5. Select OK, and and then select Restart.

6. After the reckoner finishes restarting, determine whether the problem still occurs.

   • If the trouble still occurs, repeat steps ane through 5, just in Stride four, articulate the lower half of the boxes in the Service list that you lot selected in your last test.

   • If the problem does not occur, the checked items are not the crusade of the problem. Repeat steps ane through 5, only in Pace 4, turn on the upper one-half of the boxes that you lot cleared in the Service list in the terminal test.

   • If you lot still feel the problem subsequently simply one service is selected in the Service list, this means that the selected service causes the problem. Go to pace ix. If no service causes this trouble, get to pace vii.

7. Select Startup, and and so select the upper half of the cheque boxes in the Startup Item list.
   

8. Select OK, so select Restart.

   • If the trouble still occurs, repeat step 7, simply this time articulate the lower one-half of the boxes in the Startup Item listing that you selected in your concluding test.

   • If the trouble does not occur, repeat stride seven, and select but the upper half of the remaining check boxes that are cleared in the Startup Particular list. Repeat these steps until you have selected all the check boxes.

   • If you still feel the problem after only 1 Startup Item is selected in the Startup Item listing, this means that the selected Startup Item causes the problem. Get to Step 10. If no Startup Item causes this trouble, a Microsoft service probably causes the trouble. To repair the service, Microsoft recommends that you reset or reinstall Windows.

9. After you decide the startup item or the service that causes the trouble, contact the plan manufacturer to decide whether the problem can exist resolved. Or, run Windows with the problem item disabled.  (Run the System Configuration utility and enable your Services and Startup Items, but articulate the check box for the trouble item.)

Reset the computer to start normally after clean boot troubleshooting

Subsequently you terminate troubleshooting, follow these steps to reset the reckoner to offset normally.

1. In Windows 10, in the search box on the taskbar, blazon msconfig. (In Windows viii or 8.one, swipe in from the correct edge of the screen, so select Search. Or, if you're using a mouse, point to the lower-right corner of the screen, and and so select Search.  Type msconfig.)

2. Select msconfig or System Configuration from the search results.

3. On the Full general tab, select Normal Startup.

4. Select Services, clear the check box beside Hibernate all Microsoft services, and and so select Enable all.

5. Select Startup, and then select Open Task Manager.

6. In Task Manager, enable all of your startup programs, and then select OK.

7. When you're prompted to restart the estimator, select Restart.

1. Click Starting time, type msconfig.exe in the Starting time Search box, and and so press Enter.
   Note If you're prompted for an ambassador countersign or for confirmation, type the password or select Continue.

2. On the General tab, select Normal Startup, and and so select OK.

3. When yous're prompted to restart the computer, select Restart.

How to start the Windows Installer service when system services are not loaded

If you run a Setup programme without starting the Windows Installer service, y'all might receive the following error bulletin:

The Windows Installer service could not be accessed. Contact your back up personnel to verify that the Windows Installer service is properly registered.

The Windows Installer service doesn't starting time if you articulate the Load organisation services bank check box in the System Configuration utility. To apply the Windows Installer service when organization services are not loaded, first the service manually. Here's how:

1. In Windows 10, in the search box on the taskbar, type estimator direction.  (In Windows viii or 8.1, swipe in from the right edge of the screen, and then select Search. Or, if you're using a mouse, indicate to the lower-right corner of the screen, and then click Search.  Type computer direction.)

2. Right-click or swipe down on Estimator Management in the search results, and and then select Manage.

3. In the console tree, select Services and Applications, and then select Services.

4. In the details pane, right-click or swipe down on Windows Installer, and then select Start.

1. Click Commencement, right-click Computer, and then select Manage.
   Note If you lot're prompted for an administrator countersign or for confirmation, blazon the countersign or provide confirmation.

2. In the console tree, select Services and Applications, and then select Services.

3. In the details pane, correct-click Windows Installer, and and so select Start.

Source: https://support.microsoft.com/en-us/topic/how-to-perform-a-clean-boot-in-windows-da2f9573-6eec-00ad-2f8a-a97a1807f3dd

Posted by: montgomeryoffinto49.blogspot.com

Share this post